SWIFT S5     

Core to Core Alignment

The Swift S5’s simple and user-friendly design enables users to splice quickly and conveniently throughout the 5 processes; stripping, cleaning, cleaving, splicing & sleeving (All-in-One). The S5’s thermal automatic stripper leaves no scratches typical of a manual stripper that frequently scratches the fiber.

Brochure | User Manual

text that describes this image

Play Video

Interested in a product?

  • Integrated 5 function in one unit (stripping, cleaning, cleaving, splicing, protecting)
  • The fusion splicer with All-In-One system provides the best workability on the pole and also in the limited work space.
  • No scratches on fiber by thermal stripping
  • 4.3-inch Color LCD Monitor with Touch Screen & Bidirectional Operation System
  • Powerful lithium polymer battery with large capacity
    • More than 350 times for full cycling of splicing and sleeving when fully charged.
  • Resistance to shock, dust and water
    • The splicer with high reliability has stable performance even in a harsh environment.
      | Shock – Free Fall : 76cm from 5 sides | Waterproof : IPx2 l Dustproof : IP5x
  • IPAAS Technology based Core Alignment
    • Swift S5 is the core alignment splicer based on the IPAAS (Image Pattern Analysis Alignment System) Technology.
  • Compatible with SWIFT Fusion Splice-On Connector (FSOC) in accordance with the Industrial Standard
  • Bidirectional Operation System
    • The monitor (touch screen) can be viewed bi-directionally for user’s preference.
  • Auto-Calibration
    • Detects the temperature, the humidity, the pressure automatically to calibrate the ARC discharge properly.

Category Description
Fiber alignment
IPAAS core to core alignment(Image pattern analysis alignment system)
Applicable type of fibers

SM(ITU-T G.652), MM(ITU-T G.651), DS(ITU-T G.653), NZDS(ITU-T G.655), ITU-T(G.657) GI EDFA, EI980, Splicing available with different type fiber(SM/MM)

Fiber count
Single fiber
Applicable fiber dimensions

Cladding diameter: 80 ~ 150μm, Coating diameter: 100 ~ 1000μm

Fiber setting and cleaved length

250μm: 0.31in~0.63in, 900μm: 0.63in(Application holder: 0.31in)

Splicing modes

Splice mode: 100, Heat mode: 50

Typical splice loss

SMF: 0.02dB, MMF: 0.01dB, DSF: 0.04dB, NZDSF: 0.04dB

Return loss

> 60dB

Splicing time

Typical 9sec

Sleeve heating time

30sec, 90sec(Connector)

Applicable protection sleeve

1.5in, 2.4in (fiber), 1.1in or 1.3in (Connector)

Storage of splice result

The last 10,000 results to be stored in the internal memory.(Image 10,000 results)

Tension test

2N / 4,4N(Option)

Operating condition

Altitude: 5,000m above sea level, Temperature:-14°F~122°F, Humidity: 0~95%, Wind: 15m/s, non-condensing, dust proof, water proof, shock proof

Storage condition

Temperature: -40°F~176°F, Humidity: 0~95%


5.6(W) x 8.9(L) x 5.2(H)in (Including rubber)


5.5Ib (Including battery 7.1Ib)

Viewing method and display

Two CMOS cameras and 4.3-inch color LCD monitor with touch screen

Fiber view and magnification

X or Y view: 300X, X and Y view: 300X, 187X(Zoom 700X)

Power supply

DC Lithium polymer battery(DC 14.8V, 8400mAh), 100~240V AC Adapter

No. of splice cycles with battery

320 cycle

Electrode life

More than 3,000 times


USB, RCA, External Power(DC 12V Available for car cigar jack)

Category Model Q’ty
Arc Fusion Splicer


AC Adapter


Sleeve Loader



Spare Electrode


1 pair
Battery Pack


Cooling Tray



Tool Box


User Manual


Carrying Case

Hard Case


USB Cable

Category Model
Battery Pack


Cleaver Blade




Fiber Holder

HS-250, HS-900, HS-2.5,HS-IN, HS-SC, HS-ILC, HS-ST, LS-900


S-160(60mm), S-140(40mm)

Sleeving Clamp


SOC Connector

SC, LC, FC, ST(Refer to FTTx Solution catalogue)

External Power

DC 12V Available for car cigar jack

Need a Sales Rep?
close slider


Looking for a sales rep in your region?


Use our interactive mapping tool for direct lines, email, and locations.

See Map