KF4AV     

Active Cladding Alignment

The Swift All-in-One KF4AV is a top-tier fusion splicer with precise alignment capabilities and the addition of a VFL and InGaAs power meter. The KF4AV systematically performing five major functions including stripping, cleaning, cleaving, splicing and sleeving, this device ensures optimum optical functionality and eliminates the extra time and expenses used to correct errors.

Brochure

Interested in a product?

  • Remote maintenance via Internet
  • Integrated 5 function in one unit (stripping, cleaning, cleaving, splicing, protecting)
  • Internally-installed Visual Fault Locator (VFL) utilizes a 650nm red laser to locate and visibly display any failure points throughout the cable such as fiber breaks, flawed splices or connectors, and other issues
  • Internally-installed InGaAs (indium, gallium, arsenide) power meter can detect the amount of power that is lost during transmission, helping potential errors to be corrected before the cable goes into use
-The All-In-OneTM system provides the most efficient use of space in any work environment compared to traditional stand alone and mechanical splicing solutions
  • State of the art thermal stripper saves time and eliminates fiber scratching and damage when compared to traditional hand stripping
  • Typical stripping time is 1.5 seconds
  • Single-action cleaver incorporates an efficient self-rotating blade and a built-in fiber chip collector to prevent skin penetration
  • One-touch alcohol cleaning pump with easy access for refilling
  • High degree of reliability and stable performance even in harsh environments
  • Compatible with a full offer of Fusion Splice-On Connectors(SOC) manufactured to comply to the most up-to-date industry standards
  • Ideal for Enterprise, Data Center Broadband and FTTH network application
Category Description
Fiber alignment
IPAAS Clad to Clad Alignment
Applicable type of fibers
0.25mm, 0.9mm, 2.0mm, 3.0mm Indoor cable
Fiber count
Single fiber
Applicable fiber dimensions
Cladding diameter : 125μm, Coating diameter : 150μm~3mm
Fiber setting and cleaved length
0.20in to 0.63in
Splicing modes
Splice mode: 300, Heat mode: 100
Typical splice loss
SM: 0.02dB, MM: 0.01dB, DS:0.04dB, NZDS: 0.04dB
Return loss
> 60dB
Splicing time
Typical 7sec with SM
Sleeve heating time
Typical 13sec with IS-60 mode, IS-60 sleeve
Applicable protection sleeve

2.4in, 1.5in and micro sleeves

Storage of splice result
Data : 5,000ea Up to, Image : 5,000ea Up to
Tension test
1.96N to 2.25N
Operating condition
Altitude: 0~5,000m above sea level, Temperature: -14°F~122°F, Humidity: 0~95%, Wind: 15m/s, non-condensing, dust proof, water proof, shock proof
Storage condition
Temperature: 40°F~176°F, Humidity: 0~95%
Dimension
132(W) x 212(L) x 73(H)mm (Without rubber protector)
Weight
1.5kg(Including battery)
Viewing method and display
2 AXIS Two CMOS cameras with 4.3-inch color LCD monito
Fiber view and magnification
X/Y : 110X , Max :220X
Power supply
Li-ion Battery(DC 14.8V, 3400mAh), 100 ~ 240V AC Charger
No. of splice cycles with battery
Typical 200 cycles
Electrode life
21,000 splices
Blade Life
75,000
Terminals
USB
Category Model Q’ty
Arc Fusion Splicer
SWIFT KF4A
1
Battery
KF-3400
1
Battery Adapter
FY1701000
1
Instructions for use
1 pair
Spare electrode
EI-24
1 pair
Transporting Case
HC-11(Hard Case)
1
Optical fiber holder
1 Pair
Cooling Tray
CT-01(1.5in)
1
Allen wrench
LD-3300
1
USB Cable
1
Hard Brush
1
Soft Brush
1
Tool Box 
1
Tweezer
1
Category Model
Battery
KF-3400
Cleaver Blade
BI-07
Electrode
EI-24
Transporting Case
ILST-SS03(L)(Soft Case)
Work Belt
WB-01
Sleeve
S09-C, S09, S30-C, S30
Sleeve clamp
SC-01
SOC Connector
SC, LC, FC, ST(Refer to FTTx Solution catalogue)
Manual stripper
CF-02
External power
DC 12V Available for car cigar jack
Optical fiber holder
HS-250, HS-900, HS-2.5, HS-IN,HF4-SC/FC,
HF4-ST, HF4-ILC, LS-900(choose one)
Need a Sales Rep?
close slider

 

Looking for a sales rep in your region?

 

Use our interactive mapping tool for direct lines, email, and locations.

See Map